PST100: Spark Tester with Accessory Kit

The PST 100 Spark Tester provides a quick and cost effective method of

inspection on thick coatings and linings.

Coating thicknesses of between 3 and 30mm can be tested.

Features

• Lightweight / Ergonomically designed
• Mains powered
• Output voltage range
• Power limited output for operator safety
• Coating thickness of between 3-30mm can be tested

Spark Tester Technical Specification

• Output voltage range: 10-55kV
• Output: Pulsed ring
• CE Compliant
• Mains voltage: 110v AC 50/60Hz
• Mains voltage: 220/240v AC 50/60Hz
• Weight (Spark Testing Unit Only): 1.05kg
• Dimensions (unit only): 6cm (w) x 20cm (h) x 27cm (l)
• Packed weight (Complete Kit Including Accessories): 4.2kg
• Dimensions (packed): 50cm x 14cm x 37cm

It can be widely used for testing butt-welded and overlap joints in the plastics & rubber, petro-chemical and pipeline construction industries.

The PST Accessory Kit has been specially created to offer a complete testing solution for most applications.

Other sizes and types of electrodes can be supplied, if required, for specific requirements.

However, to ensure the stability of the output voltage, large electrodes should not be used.

Complete Kit - Includes:-

• PST-100 Spark Tester Unit 110v or 220/240v (Preferred voltage to be selected when purchasing)
• Executive custom style transport/storage case
• Spare HV Coil
• Spark gap setter
• Flexible probe
• Pointed probe
• Drum brush
• 2 x 220mm Insulated extension rods
• Gauze mesh electrode with adaptor
• 150mm Phosphor bronze brush electrode with adaptor
• Operating instructions

Please Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.

Availability: Non-stock item. Delivery status, normally 2/3 days from receipt of order.