Digital Thermometer

Our digital thermometer helps to check the hot air preheat and extrudate temperatures, required by German DVS Standards Code 2207-4. It may also be used to check the surface temperature of Butt Fusion Heater Plates/Elements & Socket Fusion Heater Bushes/Blocks/Tool Ends prior to Plastic Pipe Welding Instalations.

The DVS Standards are the recognised benchmark for plastic welding worldwide.

Technical Data:

• Measuring range:    -150°C to +1767°C
• Accuracy:    better than 1%
• Sensor:     NiCr-Ni, acc. to ½ DIN 43710, for plug-in operation
• Display:    approx. 13mm high, 3½ digit LCD
• Nominal temperature:    25°C
• Working temperature:    0°C to 45°C
• Atmospheric humidity:    0 to 80% r.F. (not condensing)
• Storage temperature:     -10°C to 70°C
• Power supply:    9V-battery type IEC 6F22 (included)
• Battery service life:     approx. 700 operating hours
• Low battery warning:     BAT displayed automatically in case of low battery
• Dimensions of case:    approx. 106(H) x 67(W) x 30(D)mm
• Weight:    approx. 150g (incl. battery)
• Simultaneous display of temperature in two separate zones
• Selectable differential mode shows zone1 - zone2 temperature
• User definable HI/LO alarms
• User self calibration
• °C/°F/K measurementBacklit four digit display
• Data hold
• MAX/MIN/AVG display
• Sleep mode
• 12 month limited warranty

• Battery
• USB Interface Cable
• PC Software CD

Important: Delivery Time is normally 5/7 working days on this item.