PVDF (Polyvinylidene Fluoride) Plastic Welding Rod

The PVDF (Polyvinylidene Fluoride) Plastic Welding Rod is offered here in 3 mm diameter (as shown in the table below.) This fluoropolymer welding rods are mainly used in the fabrication of chemical baths, wet benches, chemical tanks and vessels (for aggresive chemicals), bespoke inert liquid enclosures and semiconductor wafer baskets.

• Welding Rods supplied in 1 mtr sticks or continuous lengths

Recommended Temperatures for Hot Gas Welding:-

* Oxidisation of the matching material & welding occurs when air is used as the welding medium.

• Important Note: The temperatures shown above are not the heat gun settings. They are the required temperatures that must come out of the heat gun nozzle in order to achieve a sucessful weld.

Please Note: The data provided falls within the normal range of product properties. However, they should not be used to establish specification limits nor used alone as the basis of design. Barnes Plastic Welding Equipment Limited assumes no responsibility for any advice provided by it or for results obtained with respect to these products. All such advice is provided free and the buyer assumes sole responsibility for the results obtained in reliance thereon.

Stock: The above mentioned welding rods are non stock items - Normal delivery: Approximately 3/5 working days from receipt of order.

Please see: Related Products for a comprehensive range of fluropolymer welding rod materials such as:-

• FEP (Fluorinated Ethylene Propylene) Welding Rod
• PFA (PerFluoroAlkoxy) Welding Rod
• PVDF (Polyvinylidene Fluoride) Plastic Welding Rod
• ECTFE (Ethylene ChloroTriFluoroEthylene) Welding Rod
• MFA (Fluorocarbon Perfluoromethoxy) Welding Rod

Please call for details...