Plastic Sheet Line Bender - Lower Single Heater - 1.5 Mtrs

Easy to use workbench plastic line bender/heater is ideal for the heating and manual folding/bending of the following plastic materials:

• PP (Polypropylene)
• PE (Polyethylene)
• PVC (Poly `vinyl chloride`)
• Acrylic - PMMA or Poly(methyl methacrylate)
• PETG (Polyethylene terephthalate)
• PC (Polycarbonate)

Can be used to produce Covid-19 (Coronavirus) Protection Screens for shops, offices, pubs, restaurants etc...

The heating temperature is set and monitored by a digital thermostat as well as a digital time switch are very helpful for the production of small quantities.

This ensures exact and reproducible heating of all thermoplastic material.

Handy additional optional extras include: An digitally set audable alarm with external horn. Also a parallel end stop, which is used to measure the lenght of the sheet to be bent.

A clip on Teflon heating sword ( can be purchased separately as another additional accessory) & can be used to heat and bend thinner gauge sheets from 0.25 to 1mm, this works within a few seconds.

Please Note: Minimum recommended bending length is 7 x the sheet thickness 'as recommended by most sheet manufacturers'.
 

Technical data:

Model: LBL150

• Working Width 1500mm
• Voltage: 230v
• Current: 5.65 Amps
• Power: 1300w 
• Maximum Sheet Thickness: 6mm (Material Dependant - ask for details)
• Machine Length: 2000mm
• Machine Weight: 20 Kilos

Recommended Additional Accessories:-

• Parallel End Stop (for both measuring the width & supporting the sheet at the rear of the machine)
• Teflon Heating Sword.

PLEASE NOTE: This machine is only for applying localised heat into the plastic sheet only. This then makes it pliable for bending or folding. This bending or folding can then be done manually by the user. It is then possible for the user to set the specific angle he wants to achieve by either using one of our Manual Bending Tables (see related products) or by producing their own former, clamp or jig in order for the heated sheet to cool or set.

N.B: All weights shown are un-packed weights. The line benders are usually boxed in sturdy wooden transport crates.

Please Note: Please take a look at our Model LBTB - Top & Bottom Heater Line Bender, for bending sheet thickness above 6mm.

Stock Availability: This is a 'non-stock item'. These machines are 'Made To Order' and the delivery time is normally between 14/21 working days from receipt of order. This delivery time is not guaranteed.

Please Click on our demo video to watch the machine in operation