BPWE 630 CNC - Workshop Operated Butt Fusion Welding Machine - 315mm to 630mm
CNC (Computer Numerical Control) operated butt fusion welding machine. Capable of welding, HDPE, PP, PVDF & PP-R or PPR, pipe to pipe, pipe to fitting and in most cases fitting to fitting.
The CNC control provides the following main functions:
-
Assist the operator during the welding cycle
-
Checks and controls the welding parameters during the welding cycle
-
Prints out a welding report at the end of the welding cycle
-
The CNC control will carry on the welding cycle once the pipe and/or fittings have been clamped into position and the correct parameters have been chosen.
-
The Welding data set up includes: Material Type - Diameter - Wall Thickness or SDR - Welding Standard - ( DVS, ISO , WIS , ISO HP , etc )
-
The database related to the welding can be transfer to a PC by means of using the software supplied
-
With two pivoting main clamps you are able to fabricate segmented or angled bends
General Data
Welding Range |
315mm - 630mm |
Segmented Bend Range |
315mm - 630mm |
90° Tee & Cross Range |
315mm - 630mm |
45° & 60° Branch Range |
315mm - 630mm |
Pipe Pressure Range |
PN 2.5 - PN 25 |
Voltage |
400v - 3 Phase - 50 Hz50 Hz |
Power |
25 kW – 37 A |
Machine Composition
PL 315 C supplied with:
-
Basic Machine C/W: with Electric Motor & Hydraulic Circuits
-
Two Main (Pivoting) Clamps 630mm Ø
-
Reducing Inserts (for the pivoting clamps): 315mm, 355mm, 400mm, 450mm, 500mm & 560mm.
-
Electric Milling Cutter/Pipe End Planer (with reducing gear and safety micro switch)
-
PTFE Coated Heating Mirror/Plate/Element (with Electronic Control)
Accessories on request:
-
Right Hand Fittings Clamp: 630mm
-
Left Hand Fittings Clamp: 630mm
-
Reducing Rings for Right Hand Fittings Clamp: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
Reducing Rings for Left Hand Fittings Clamp: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
Stub End Device: 315mm to 630mm
-
90° Tee Making Device: 315mm to 630mm
-
Reducing Rings for 90' Tee Making Device: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
Cross Making Device: 315mm to 630mm
-
Additional Reducing Rings for Cross Making Device: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
45° and 60° Tee (Equal Branch) Making Device: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
Reducing rings for 45° and 60° Tee Making Device: 315mm, 355mm, 400mm, 450mm, 500mm & 560mm
-
Packaging: On pallet
Please Note: Technical data might be changed without notice
|