BPWE 315 CNC 90 mm - 315 mm Workshop Operated Butt Fusion Welding Machine
CNC (Computer Numerical Control) operated butt fusion welding machine. Capable of welding, HDPE, PP, PVDF & PP-R or PPR, pipe to pipe, pipe to fitting and in most cases fitting to fitting.
The CNC control provides the following main functions:
-
Assist the operator during the welding cycle
-
Checks and controls the welding parameters during the welding cycle
-
Prints out a welding report at the end of the welding cycle
-
The CNC control will carry on the welding cycle once the pipe and/or fittings have been clamped into position and the correct parameters have been chosen.
-
The Welding data set up includes: Material Type - Diameter - Wall Thickness or SDR - Welding Standard - ( DVS, ISO , WIS , ISO HP , etc )
-
The database related to the welding can be transfer to a PC by means of using the software supplied
With two pivoting clamps you are able to fabricate segmented bends
General Data
Welding Range |
90mm - 315mm |
Segmented Bend Range |
90mm - 315mm |
90° Tee & Cross Range |
90mm - 250mm |
45° & 60° Branch Range |
90mm - 250mm |
Pipe Pressure Range |
PN 2.5 - PN 25 |
Voltage |
230v 50 Hz |
Power |
5.5 kW – 30 A |
Machine Composition
PL 315 C supplied with:
-
Basic machine complete with motor electric and hydraulic circuits
-
Two pivoting clamps d. 315mm
-
Reducing inserts for the pivoting clamps d. 90, 110, 125. 140, 160, 180 ,200, 225, 250, 280mm (Imperial/Inch sizes available on request)
-
Electric mill cutter with reducing gear and safety micro switch
-
PTFE coated heating mirror with electronic thermostat
Accessories on request:
-
Right fittings clamp d. 315mm / 12"
-
Left fittings clamp d. 315mm / 12"
-
Reducing rings for right and/or left fittings clamps d. 90, 110, 125, 140, 160, 180, 200, 225, 250, 280mm (Imperial/Inch sizes available on request)
-
Stub end device 90 - 315mm / 3" - 12"
-
90° Tee and cross device d. 250mm / 10"
-
Reducing rings for 90' tee device d. 90, 110, 125, 140, 160, 180, 200, 225mm (Imperial/Inch sizes available on request)
-
Additional reducing rings for fabrication of crosses d. 90, 110, 125, 140, 160, 180, 200, 225mm (Imperial/Inch sizes available on request)
-
45° and 60° Tee (equal branch) device d. 250mm / 10"
-
Reducing rings for 45° and 60° tee device d. 90, 110, 125, 140, 160, 180, 200, 225mm (Imperial/Inch sizes available on request)
-
Packaging on pallet
|