PST100: Spark Tester with Accessory Kit

The PST 100 Spark Tester provides a quick and cost effective method of inspection on thick coatings and linings. Coating thicknesses of between 3 and 30mm can be tested.

Features

• Lightweight / Ergonomically designed
• Mains powered
• Output voltage range
• Power limited output for operator safety
• Coating thickness of between 3-30mm can be tested

Technical Specification

• Output voltage range: 10-55kV
• Output: Pulsed ring
• CE Compliant
• Mains voltage: 220/240v AC 50/60Hz (ref: T51)
• Weight (unit only): 1.05kg
• Dimensions (unit only): 6cm (w) x 20cm (h) x 27cm (l)
• Packed weight (accessory kit): 4.2kg
• Dimensions (packed): 50cm x 14cm x 37cm

It can be widely used for testing butt-welded and overlap joints in the plastics & rubber, petro-chemical and pipeline construction industries.

The PST Accessory Kit has been specially created to offer a complete testing solution for most applications.

Other sizes and types of electrodes can be supplied, if required, for specific requirements. However, to ensure the stability of the output voltage, large electrodes should not be used.

Accessories Available

PST-100 unit 220/240V, in executive style case c/w spare HV Coil, spark gap setter, flexible probe, pointed probe, drum brush, 2 x 220mm insulated extension rods, gauze mesh electrode with adaptor, 150mm phosphor bronze brush electrode with adaptor and operating instructions

Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation