Plastic Sheet Line Bender

Easy to use workbench plastic line bender/heater is ideal for the heating and manual folding/bending of the following plastic materials:

• PP (Polypropylene)
• PE (Polyethylene)
• PVC (Poly `vinyl chloride`)
• ACRYLIC
• PETG (Polyethylene terephthalate)
• PC (Polycarbonate)

The heating temperature is set and monitored by a digital thermostat as well as a digital time switch are very helpful for the production of small quantities.

This ensures exact and reproducible heating of all thermoplastic material.

Handy additional optional extras include: An digitally set audable alarm with external horn. Also a parallel end stop, which is used to measure the lenght of the sheet to be bent.

A clip on Teflon heating sword ( can be purchased separately as another additional accessory) & can be used to heat and bend thinner gauge sheets from 0.25 to 1mm, this works within a few seconds.

Please Note: Minimum recommended bending length is 7 x the sheet thickness 'as recommended by most sheet manufacturers'.

Technical data:
Model: HT Workbench Plastic Sheet Heater
Maximum working width: 1000 – 3000mm

Recommended Additional Accessories:-

• Parallel End Stop (for both measuring the width & supporting the sheet at the rear of the machine)
• Teflon Heating Sword.

PLEASE NOTE: THIS TOOL IS FOR HEATING THE SHEETS ONLY ANY FOLDING OR BENDING OF THE SHEET IS DONE MANUALLY.

N.B: All weights shown are packed weights. The line benders are usually boxed in sturdy wooden transport crates.

Please Note: Please take a look at our Model HT x 2 Top & Bottom Heater Line Bender, for bending sheet thickness above 4mm.

Please Click on our demo video to watch the machine in operation